MCO 25982 | 3M Scotchgard™ Bonnet Cleaner Concentrate 11L
Scotchgard Bonnet Cleaner is a concentrated product intended to be diluted and dispensed using the 3M™ Twist ‘n Fill™ Cleaning Chemical Management System.
This product is an effective surface cleaner designed to be used with the 3M™ Carpet Bonnet Pad. Bonnet Cleaner is formulated for use with Scotchgard™ Carpet Protector and is an important part of the 3M carpet care system.

Applications:
- Commercial grade carpets.
- Low profile loop or cut-pile construction
- Traffic lanes

General Use Directions:
Note: Test the bonnet cleaner in an inconspicuous area to make sure the carpet is colorfast.
Apply ready-to-use solution to a small area. After several minutes, blot the carpet with a clean white cloth or paper towel. If color from the carpet transfers
to the cloth or towel, discontinue use.

1. Vacuum the carpet area thoroughly.
2. Use a 3M™ All Purpose Sprayer (Model AP-1) or a bulk pressurized sprayer to apply the bonnet cleaner.
3. Dispense the bonnet cleaner using the 3M™ Twist ‘n Fill™ Dispenser directly into the solution tank of your sprayer.
4. Apply the ready-to-use solution at a rate of 200-300 ft2 per gallon.
5. Allow 1-2 minutes dwell time for the cleaner to penetrate the fiber.
6. Clean using a 175 rpm floor machine with a 3M Carpet Bonnet Pad or carpet brush.
7. Do not over-wet the carpet bonnet pad by soaking it, however spray the pad with bonnet cleaner before starting to reduce the drag of the machine on the carpet.
8. Bonnet the area until the light foam generated is worked into the carpet.
9. When the pad becomes heavily soiled, turn the pad over and continue.
10. Change to a clean pad when necessary.
11. Vacuum the area when the carpet is completely dry.

Excellent cleaner for lightly-soiled carpets. Maintains anti-soiling and stain-resistant properties of carpets treated with Scotchgard™ Protector. Ready-to-use product with neutral pH is safe for cleaning nylon stain-resistant carpets.