SSS 48256 | SSS Navigator #56 Wild Fire Scrub & Recoat Cleaner
SSS Navigator #56 Wild Fire Scrub & Recoat Cleaner: 2/2Ltr.
This Scrub and Recoat Cleaner is a biodegradable, very low toxicity and VOCs, environmentally responsible floor cleaner specifically designed for the interim maintenance procedure of scrubbing and recoating without the use of harmful chemicals, such as phosphates (promote algae blooms), EDTA (carcinogen) and NPE (harmful biodegradable intermediate). This is the ideal product for any type of floor maintenance program to help extend the time between restorative stripping procedures, saving time and labor. Aggressively removes embedded soils and scuffs in the top layers of floor finish, and prepares the surface for re-coating with minimal rinsing required. This low foam formula leaves a clean, film free surface, making it ideal for use in an automatic scrubber. Scrub and Recoat Cleaner can also be used to remove the factory seal from newly installed VCT flooring and is compatible with any green or traditional floor care program. EcoLogo certified. RTU yields per refill: 17 gallons.

Why It’s A Better System:
- Concentrate and RTU labels are numbered and color coded for safety and to facilitate training
- Closed system - Spill proof container
- New Metered Tip with each concentrate provides proper dilution each time
- English/Spanish label copy
- Each concentrate has an easy carry handle
- Recyclable container

Why It’s A Better Cleaner:
- Highly concentrated - provides low end use cost.
- This low foam formula leaves a clean, film free surface, making it ideal for use in an automatic scrubber.
- Low VOC Level
- Pleasant citrus fragrance - leaves surfaces smelling clean

How It Cleans:
FOR USE IN A SPRAY BOTTLE: Dispense diluted product into properly labeled RTU container. Simply spray on surfaces to be cleaned, let solution sit and wipe off with a clean absorbent cloth or towel. For heavy soils, allow surface to soak 3 - 4 minutes, then agitate, and rinse clean.
FOR USE IN AN AUTOMATIC SCRUBBER OR
MOP BUCKET: Dispense diluted product into mop bucket or automatic scrubber. Apply product on surfaces to be cleaned. Allow a few minutes of dwell time for the
solution to penetrate the soil. If necessary, agitate to help remove excessive soils. If solution becomes visibly dirty, discard and make up fresh solution. Rinse with clean water as needed.

Where It Cleans:
- Floors
- VCT Floors