BOB B-5221 | BOBRICK MatrixSeries™ Surface-Mounted Seat-Cover Dispenser
Bobrick MatrixSeries™ Surface-Mounted Seat-Cover Dispenser: shall be durable, high-IMPACT grey ABS with high-gloss finish on exposed surfaces.
- Front of dispenser shall have same degree of arc as other BOBRICK MatrixSeries™ accessories in the washroom.
- Radius on corners, edges and top of dispenser shall complement other BOBRICK MatrixSeries™ washroom accessories.
- Unit shall have a rectangular opening for dispensing toilet seat covers and a concealed opening in bottom for filling.
- Capacity shall be 250 paper toilet seat covers.

Operation:
Dispenser holds single- or half-fold paper toilet seat covers.
Dispenser fi lls from bottom through concealed opening.
Capacity: 250 toilet seat covers.

Installation:
Mount unit on wall or partition of toilet compartment with two #8 x 1?'' (4.2 x 38mm) fl at-head sheet-metal screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For other wall surfaces, provide fi ber plugs or expansion shields for use with sheet-metal screws, or provide 1/8'' (3mm) toggle bolts or expansion bolts.
Note: Provide a 5'' (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection to provide room for fi lling dispenser from bottom.