ASI 64684-F | ASI Recessed Mounted Dual Sanitary Napkin & Tampon Dispenser
American Specialty Recessed Mounted Dual Sanitary Napkin & Tampon Dispenser, Free operation: shall hold 15 napkins and 23 tampons of specified sizes and shall have cabinet fabricated of alloy 18-8 stainless steel, type 304, 20 gauge.
- Full face door shall be fabricated of 18 gauge same grade stainless steel, and shall be attached to cabinet with a full length 3/16?? dia. (5mm) stainless steel multi-staked piano hinge and shall be held closed with two (2) tumbler locks keyed alike to other ASI washroom equipment.
- All exposed surfaces shall have a No 4 satin finish and shall be protected during shipment with a PVC film easily removable after installation.
- Structural assembly of body and door components shall be of welded construction and have no exposed fasteners or welded seams.
- Internal coin-box shall be keyed differently than door locks.
- Dispensing mechanisms shall be fastener mounted internally to provide ability to change mechanisms for coinage denomination.
- Weights for each feed track shall be supplied. Factory installed coin operation denomination shall be Free Operation
- Wall Opening: 16" x 26" x 6 1/2"

Installation:
Unit is mounted in wall recess using No 10 self tapping screws (by others). For maximum usability and compliance with ADA Accessibility Guidelines, unit should be installed so that coin slot is between 54" (1372mm) maximum above finished floor (AFF) and 38" (965mm) minimum AFF.
Note that coin slot is 6-3/8?? (162mm) above bottom edge of RWO, bottom flange is 5/8?? (16mm) below bottom edge of RWO

Operation:
- Deposit of specified coin allows operation of dispenser.
- Napkin and tampon dispensers operate independently.
- Selected product drops into vending opening after operator actuation.
- Indicator displays empty condition and blocks coin slot when product is depleted.
- Unit vend product supply is replenished on cycle determined by maintenance needs by opening door and manually reloading product into dispenser supply tracks.
- Track weights MUST BE USED to provide positive feed.