ASI 0430-9 | ASI Surface Mounting Cabinet With Shelf, Mirror, Paper Towel and Soap Dispenser
actuate and require no grasping or twisting by operator.
- Valve shall be constructed of a chrome-plated brass body with stainless steel and plastic internal parts.
- All exposed surfaces shall be No 4 satin finish and be protected during shipment with a PVC film easily removable after installation. A SM (-9) Collar is provided which is applied to cabinet before installation on wall.

Installation:
- Unit is surface mounted on wall using four (4) No 10 self tapping screws (by others) through concealed mounting holes provided.
- For compliance with ADA Accessibility Guidelines, unit should be installed so that bottom edge of reflecting surface is 40?? (1016mm) max. AFF. Suggested mounting height for normal usage is bottom of cabinet trim 8" to 10" (203mm to 254mm) above vanity surface.
- SM collar is installed on cabinet prior to mounting on wall following procedure described on SM Collar Data Sheet.

Operation:
Soap is manually dispensed by pushing valve button until supply is depleted. Towels are self-feeding until supply is depleted. Unit may be reloaded easily by opening door or tank assembly with a partial load in-place and will continue to feed properly.
Tank supply is replenished manually on cycle determined by maintenance needs.