ASI 64676 | ASI Recessed Paper Towel Dispenser and Waste Receptacle
American Specialty Recessed Paper Towel Dispenser and Waste Receptacle: shall hold and dispense 800 standard multi-fold, 600 standard C-fold or 1100 standard single-fold paper towels, and shall have a waste capacity of 7 gallons (26.5 liters).
- An adjustable guide shall be provided to allow dispensing of single-fold, multi-fold or C-fold paper towels.
- Cabinet, door, dispenser and waste receptacle shall be fabricated from type 304 stainless steel alloy 18-8.
- All exposed surfaces shall have a No 4 satin finish and shall be protected during shipment by PVC film easily removable after installation.
- Cabinet shall be 20 gauge with a 1" (25.4) wide perimeter trim to lay flush against wall and shall have no exposed fastening devices or visible seams.
- Full-face door shall be 18 gauge, fabricated from one piece with no miters or seams on face and shall have 1/2" (13) square returns to the wall.
- Door shall be attached to cabinet body with a full length 3/16" diameter (Ø4.8) stainless steel multi-staked piano hinge and shall be held closed with two (2) tumbler locks keyed alike to other ASI washroom equipment.
- Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety.
- Waste container shall have hemmed edges for safety.
- Structural assembly of all components shall be of welded construction.
- Waste receptacle door shall be attached to cabinet with a springloaded stainless steel piano hinge and shall have the international waste symbol on face.
- Wall Opening: 11 1/2" x 53 1/2" x 6 1/4"

Installation:
- Install unit in wall recess with No 10 self-tapping screws (by others) through concealed mounting holes provided.
- For compliance with ADA Accessibility Guidelines, install unit so that centerline of towel dispenser slot is 48" (1219) maximum above finished floor (MAX AFF).

Operation:
- Paper towels are manually withdrawn through dispensing slot. A towel adapter ensures that towels feed properly until depleted.
- Unit will continue to feed properly when reloaded with a partial load in place.
- Refill dispenser by unlocking door and replacing towels for an empty or partially empty unit.
- Dispenser supply is replenished and waste container is emptied manually on cycles determined by maintenance needs.
-Locking full-face door over compartments prevents unauthorized access or removal.