ASI 0318 | ASI Surface Mounted Soap Dispenser and Shelf
American Specialty Surface Mounted Soap Dispenser and Shelf: shall hold and dispense 83 oz or 2.6 quarts (2.5liters) of liquid and lotion soaps, synthetic detergents and antibacterial soaps containing PCMX and/or Triclosan.
- Dispenser tank and shelf/cover shall be type 304 stainless steel alloy 18-8. Holding tank shall be fabricated as a welded integral unit; tank and shelf/cover shall be 18 gauge.
- All exposed surfaces shall be satin finish and be protected during shipment with PVC film easily removable after installation.
- Shelf/cover shall be held closed with a concealed latch.
- Valve operation shall comply with 2010 ADA Accessibility Standards by requiring no more than 5 lbsf (22.2 Newtons) pressure to actuate and require no grasping or twisiting by operator.
- Valve shall have a chromeplated brass body with stainless steel, rubber and plastic internal parts.
- Overall Size: 17 3/8" x 3 7/16" x 5 1/16"

Installation:
Unit is mounted on wall using two (2) ¹ 10 screws (by others) through concealed mounting holes in tank back.
For compliance with 2010 ADA Accessibility Standards, install unit so that dispenser valve is 44" (1118) maximum above finished floor.

Operation:
Soap is manually dispensed by pushing valve button until supply is depleted. Unit may be reloaded easily by opening hinged shelf/cover.
Tank supply is replenished manually on cycle determined by maintenance needs.