ASI 0694-24 | ASI Surface Mounted Shelf With Backsplash
American Specialty Surface Mounted Shelf With Backsplash: shall be fabricated of alloy 18-8 stainless steel, type 304, 18 gauge; brackets shall be 18 gauge.
- Shelf shall have a 1" (25mm) hollow pan construction on three (3) sides and raised back splash all from one piece and shall be fully de-burred.
- All exposed surfaces shall be No 4 satin finish and shall be protected during shipment with a PVC film easily removable after installation.
- Structural assembly of shelf and bracket supports shall be of welded construction.
- Shelf shall be sized and have brackets located as per standard schedule.
- 5" D X 24" L

Installation:
Unit is surface mounted on wall or partition using No 10 self tapping screws (by others) through holes provided in support brackets.
For compliance with ADA Accessibility Guidelines, unit should be installed so that shelf top is between 48" (1219mm) maximum above finished floor (AFF) and 32" (813mm) minimum AFF; for most common utility, typical is 42" (1067mm) AFF or 18" (457mm) above wash basin.

Operation:
Shelf is stable and stationary after proper and secure mounting to adequate wall reinforcement or stud structure. Shelf is suitable for wet (selfcontained) or dry materials storage.