You're here :
ASI Surface Mounted Sav-Half Single Roll Tissue Holder -
Item #: ASI 8020 By ( American Specialty INC )
Item #: ASI 8020 By ( American Specialty INC )
ASI 8020 | ASI Surface Mounted Sav-Half Single Roll Tissue Holder
American Specialty Surface Mounted Sav-Half Single Roll Tissue Holder: shall hold and dispense all standard core roll tissue, up to 5"(127mm) in diameter.
- Unit back plate and support arms shall be fabricated of 1/8" (3mm) thick clear anodized aluminum with a satin finish.
- Unit shall be of unibody construction, with a concealed hinged snap lock arm and no removable parts.
- Tissue roll shall not be removable until tissue is depleted
Installation:
- Unit is surfaced mounted to wall or partition using No10 self tapping screws (supplied) through two (2) slots in back plate.
- For compliance with ADA Accessibility Guidelines, unit should be installed with roller centerline between 44" (1118mm) maximum above finished floor (AFF) and 19"
(483mm) minimum AFF and leading edge of roll no further than 36" (914mm) from back wall behind commode.
Operation:
Unit is replenished by removing depleted core from holder and then pulling hinged side forward, which releases the snap-lock mechanism and allows hinged arm to swing out and around for servicing. Roll cannot be removed from unit until toilet tissue is exhausted.
American Specialty Surface Mounted Sav-Half Single Roll Tissue Holder: shall hold and dispense all standard core roll tissue, up to 5"(127mm) in diameter.
- Unit back plate and support arms shall be fabricated of 1/8" (3mm) thick clear anodized aluminum with a satin finish.
- Unit shall be of unibody construction, with a concealed hinged snap lock arm and no removable parts.
- Tissue roll shall not be removable until tissue is depleted
Installation:
- Unit is surfaced mounted to wall or partition using No10 self tapping screws (supplied) through two (2) slots in back plate.
- For compliance with ADA Accessibility Guidelines, unit should be installed with roller centerline between 44" (1118mm) maximum above finished floor (AFF) and 19"
(483mm) minimum AFF and leading edge of roll no further than 36" (914mm) from back wall behind commode.
Operation:
Unit is replenished by removing depleted core from holder and then pulling hinged side forward, which releases the snap-lock mechanism and allows hinged arm to swing out and around for servicing. Roll cannot be removed from unit until toilet tissue is exhausted.
Item Number: ASI 8020- ASI Sav-Half Toilet Paper Holder-Surface Mounted
Shipping Weight per Each : 0.30 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
|
( See all Source One Plus products by American Specialty INC ) |
Show More Related Product ....
