You're here :
ASI Heavy Duty Stainless Steel Round Towel Bar - 24" Length
Item #: ASI 0755-SS24 By ( American Specialty INC )
Item #: ASI 0755-SS24 By ( American Specialty INC )
ASI 0755-SS24 | ASI Heavy Duty Stainless Steel Round Towel Bar
American Specialty Heavy Duty Stainless Steel Round Towel Bar: shall have bar fabricated of alloy 18-8 stainless steel, type 304, 1" diameter (Ø25) x 20 gauge.
- Support posts shall be fabricated of heavy solid cast brass.
- Bar and support posts shall have satin finish.
- Bar tubing shall not turn when set screw (supplied) is engaged in support post and tube.
- 24" Length
Installation:
- For compliance with ADA Accessibility Guidelines, install unit so that centerline of bar is 48" (1219) above finished floor if clear floor forward reach access is provided or 46" (1168) MAX AFF is side reach over obstruction is only provided (i.e. vanity).
- Surface mount each support post to wall with three (3) 1/4" diameter (Ø6) oval, pan or round head fasteners of length and type to suit wall conditions (supplied by installer) through mounting holes in posts.
- To mount on stud walls, provide concealed backing at screw points, secured to studs.
- Backing must comply with local building codes.
- If concealed backing is not provided, secure with toggle bolts.
- To mount on solid walls, use plastic or fiber type (Rawl®) plugs or expansion bolts.
American Specialty Heavy Duty Stainless Steel Round Towel Bar: shall have bar fabricated of alloy 18-8 stainless steel, type 304, 1" diameter (Ø25) x 20 gauge.
- Support posts shall be fabricated of heavy solid cast brass.
- Bar and support posts shall have satin finish.
- Bar tubing shall not turn when set screw (supplied) is engaged in support post and tube.
- 24" Length
Installation:
- For compliance with ADA Accessibility Guidelines, install unit so that centerline of bar is 48" (1219) above finished floor if clear floor forward reach access is provided or 46" (1168) MAX AFF is side reach over obstruction is only provided (i.e. vanity).
- Surface mount each support post to wall with three (3) 1/4" diameter (Ø6) oval, pan or round head fasteners of length and type to suit wall conditions (supplied by installer) through mounting holes in posts.
- To mount on stud walls, provide concealed backing at screw points, secured to studs.
- Backing must comply with local building codes.
- If concealed backing is not provided, secure with toggle bolts.
- To mount on solid walls, use plastic or fiber type (Rawl®) plugs or expansion bolts.
- Item Number: ASI 0755-SS24
- ASI Towel Bar (Heavy-Duty) 24" - Surface Mounted. St. Stl
- 24" Length
Shipping Weight per Each : 1.60 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
( See all Source One Plus products by American Specialty INC ) |
Show More Related Product ....