ASI 0400 | ASI Heavy Duty Stainless Recessed Steel Soap Dish And Bar For Dry Wall Mounting
American Specialty Heavy Duty Stainless Steel Soap Dish For Dry Wall Mounting: shall be formed of 20 gauge alloy 18-8 seamless deep drawn stainless steel, type 304. Exterior shall have polished bright finish.
- Retaining lip with rounded corners shall be welded to body and shall project 5/8" (16) from bezel.
- Optional mounting clamp shall be fabricated of 18 gauge corrosion protected steel with mounting holes for No 8-32-UNC-2A machine screws (by others).
- Water runoff path shall be provided as pattern of raised dimples on soap shelf and shall prevent soap from slipping.
- Wall Opening: 6 1/8" W x 4 1/8" H x 4" D

Installation:
For Standard Recessed Mounting:
Use two (2) No 8 stainless steel Philips flat or oval head self tapping or wood screws (by others) of suitable length to penetrate blocking in back of RWO by approximately 1/2" (13). Apply a continuous bead of silicone sealant (by others) behind flange.
Tighten screws to hold flange tight against finished wall face. Wipe off excess sealant immediately.

Optional Method for Recessed Mounting:
Order separate item Model No 40 dry wall clamp.
- Loosely attach clamp to the back of the unit with two (2) stainless steel Philips flat or oval head No 8-32-UNC-2A machine screws (provided by others to suit wall conditions).
- Apply a continuous bead of silicone sealant (by others) behind flange.
- Insert into RWO and adjust clamp so that it grips inside wall surface through opening.
- Secure accessory to clamp and wall by tightening screws.
- Wipe off excess sealant immediately.

Rough Wall Opening (RWO) required is ………6-1/8" W x 4-1/8" H x 4" D (156 x 105 x 102)

Operation:
Raised dimples on the soap shelf allow water to drain away and provide gripping surface to retain soap.