ASI 0715 | ASI Surface Mounted Double Dual Roll Toilet Paper Holder
American Specialty Surface Mounted Double Dual Roll Toilet Paper Holder: shall hold two (2) rolls of standard core size toilet tissue up to 6" diameter (Ø152) and 4-1/8" to 4-3/4" (105-121) wide.
- Unit shall be fabricated of 18 gauge polished chrome-plated steel.
- Brake springs shall provide controlled delivery for each roll of toilet paper.
- Roll core prevents access to releasecatch spring and roll shall be non-removable until roll is depleted.

Installation:
For general utility, mount unit 32" (813) AFF (above finished floor) from center line of holder.
Surface mount and secure holder to wall with two (2) No 10 self tapping screws (supplied by others) through mounting slots in back plate.
For compliance with ADA Accessibility Guidelines, install unit so that center line of holder is 19" (483) MIN AFF (minimum above finished floor) to 44" (1118) MAX AFF (maximum above finished floor).

Operation:
Toilet paper is dispensed with controlled delivery from each roll. Roll is replaced on a cycle determined by maintenance needs. Roll cores prevent access to release catches and must be removed to allow end support arms to swing away for service roll replacements.