Subtotal:
$0.00
0 Items in your cart
You're here : Home    Skin Care & Personal Hygiene    Personal Care    Toothpaste/Toothbrushes & Mouthwash    ASI 7335-S - ASI Surface Mounted Satin Tumbler and Toothbrush Holder -

ASI Surface Mounted Satin Tumbler and Toothbrush Holder -

Item #: ASI 7335-S By ( American Specialty INC )

ASI 7335-S | ASI Surface Mounted Satin Tumbler and Toothbrush Holder
American Specialty Surface Mounted Satin Tumbler and Toothbrush Holder: shall be fabricated of stainless steel alloy 18-8, type 304.
- Holder tray shall be of drawn seamless construction with a 2-1/2" (64mm) dia. hole to hold a tumbler and slots to hold six (6) standard toothbrushes.
- Support post shall be 1" x 1/2" (25mm x 13mm) rectangular tubing with formed mounting flange and bracket welded on end.
- A stainless steel setscrew shall be provided on bottom perimeter of flange to lock unit to mounting plate.
- Mounting plate shall be provided and shall be 18 gauge.

Installation:
- Surface mount unit on wall using No10 self tapping screws (by others) through holes provided in mounting plate into suitable prepared mountings (by others) or other suitable mounting hardware (by others) to suit wall conditions.
- Hang post and flange assembly on mounting plate and tighten setscrew to lock unit to plate.
- For compliance with ICC/ANSI A-117.1-2003 and ADA Accessibility Guidelines install unit with top of holder tray 48" (1219mm) maximum above finished floor (MAX AFF)
if clear floor forward reach or if clear floor side reach access only is provided or 46" (1168mm) MAX AFF if side reach access over an obstruction (e.g. vanity) with reach depth greater than 10" (254mm) and less than 25" (635mm) is only provided or 44" (1118mm) MAX AFF if forward reach over an obstruction with reach depth greater than 20" (508mm) and less than 25" (635mm) is only provided.
- For general utility mount unit with top of holder tray 8" to 12" (203mm to 305mm) above vanity basin.

Operation:
Tumbler hole will accommodate a standard tumbler that tapers to less than 2-1/4" (57mm) dia. at bottom, or a straight tumbler of 2-1/8" (54mm) dia. with a rim larger than 2-1/2" (64mm) dia. Toothbrush holder accommodates up to six (6) toothbrushes


  •   Item Number: ASI 7335-S
  •   ASI Tootbbrushflumbler Holder - Surface Mounted, Satin



Shipping Weight per Each : 0.30 lbs

NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.



Are we missing something
If you've noticed an error on this page please let us know ...
American Specialty INC

( See all Source One Plus products by American Specialty INC )



Copyright ©   Cal-San Co. All Rights Reserved.

Developed by Terawebsite.com