You're here :
SSS Low Odor Stripper, 22H - 2 Liters
Item #: SSS 3M23555 By ( TRIPLE S )
Item #: SSS 3M23555 By ( TRIPLE S )
SSS 3M23555 | SSS Low Odor Stripper, 22H
SSS 22H Low Odor Stripper : is a low-odor floor stripper for use on most resilient tile floors. This stripper is formulated to quickly and
effectively remove multiple layers of floor finish and sealer.
Applications:
- Most resilient tile floors.
- Not for use on wood floors.
General Use Directions :
1. Dispense 3M Floor Stripper LO using the Twist ‘n Fill dispenser into a mop bucket.
2. Liberally apply the diluted stripper solution with a mop, (100 sq. ft./gallon) leaving the floor uniformly wet.
3. Allow 5-10 minutes for the stripper to penetrate and soften the finish. Do not let floor dry until rinsing withwater.
4. Use a low speed floor machine (175 rpm) with the appropriate 3M stripping pad to thoroughly remove the old finish from the floor.
5. Pick up the soiled solution with a wet vacuum.
6. Flood rinse the floor with clean water and remove with wet vacuum.
7. Mop the floor with a tightly wrung mop of clean water.
8. Let the floor dry completely before applying new finish.
Note: When using an automatic scrubber equipped with appropriate 3M pad, remember to allow the stripping solution to remain wet on the floor for five minutes before agitation and pickup.
SSS 22H Low Odor Stripper : is a low-odor floor stripper for use on most resilient tile floors. This stripper is formulated to quickly and
effectively remove multiple layers of floor finish and sealer.
Applications:
- Most resilient tile floors.
- Not for use on wood floors.
General Use Directions :
1. Dispense 3M Floor Stripper LO using the Twist ‘n Fill dispenser into a mop bucket.
2. Liberally apply the diluted stripper solution with a mop, (100 sq. ft./gallon) leaving the floor uniformly wet.
3. Allow 5-10 minutes for the stripper to penetrate and soften the finish. Do not let floor dry until rinsing withwater.
4. Use a low speed floor machine (175 rpm) with the appropriate 3M stripping pad to thoroughly remove the old finish from the floor.
5. Pick up the soiled solution with a wet vacuum.
6. Flood rinse the floor with clean water and remove with wet vacuum.
7. Mop the floor with a tightly wrung mop of clean water.
8. Let the floor dry completely before applying new finish.
Note: When using an automatic scrubber equipped with appropriate 3M pad, remember to allow the stripping solution to remain wet on the floor for five minutes before agitation and pickup.
Item Number: SSS 3M23555- 3M 22H Low Odor Stripper, Gray
- Gray Cap
- 2 Liters
- 6 bottles per case
- Free Shipping
Shipping Weight per Case : 32.00 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
|
( See all Source One Plus products by TRIPLE S ) |
Show More Related Product ....
