SSS 13099 | SSS ORION Seal/Finish for Stone & Natural Tile Floors
ORION is designed for the protection and maintenance of stone, concrete, and natural tile flooring. Provides a barrier against soiled water, black marks, dusting, grease and other soils.
Reduce maintenance and repair costs with this tough sealer. Seal and finish for porous floors: stone, concrete, brick, quarry tile. Non-yellowing, water based, VOC compliant seal.
Protects floor, easier to clean, prevents dusting. High solids.

Areas of Use: Use on porous stone, natural tile and concrete floors.
- Restaurants, hotels, motels, offices

What the Pros Know:
Some level of porosity is required for
good adhesion. If the surface is very smooth,
prepare a small test area to verify adhesion.
Curing compounds will affect water based
sealers. Make sure silicone curing agents
have not been used. If unsure, prepare a
small test area to verify adhesion.
If used on new concrete, allow 90 days
before application. If moisture is present, it
will come to the surface and lift the sealer.
ORION exceeds the minimum slip
resistance requirements for floor finishes
when tested in accordance with ASTM
2047-82 (UL test procedure).
- Schools, universities
- Supermarkets, malls