ASI 0002-ASM | ASI Surface Mounted Square Paper Cup Dispenser- Stainless Steel
American Specialty Surface Mounted Square Paper Cup Dispenser- Stainless Steel: shall hold 100 three (3) ounce (90m1) paper cups.
- Dispenser shall be fabricated of alloy 18-8 stainless steel, type 304, No 22 gauge.
- All exposed surface shall be No 4 satin finish and be protected during shipment with a PVC film easily removable after installation.
- Door of dispenser shall be attached to unit at the bottom with a full length 3/16" dia. stainless steel multi-staked piano hinge and shall be held closed by a heavy duty spring tensioned lock at top.
- An elongated slot to function as a refill viewer shall be provided at front face.

Installation:
Unit is surface mounted using No 10 self tapping screws (by others) through concealed mounting holes. For compliance with ADA Accessibility Guidelines the unit should be installed so that the bottom of the cup dispenser does not exceed 54" (1372mm) maximum above finished floor (AFF) when clear side access is provided or 48" (1219mm) maximum AFF with forward reach access only and 46" (1168mm) maximum AFF with side reach only provided over an obstruction (i.e. vanity).

Operation:
Cups are self-feeding until supply is depleted. Dispenser may be reloaded with a partial load in-place and will continue to feed properly. Supplies are replenished manually on a schedule determined by maintenance needs.